Refrigerator for preserving sensitive products used by laboratories

This refrigerator has been designed in response to the precise requirements of medical analysis for preserving temperature-sensitive products such as samples, reagents and serums.

The latest generation of equipment moreover complies with the SILVER and GOLD safety standard. 85-95 mm thick insulation with K less than or equal to 0.35W /m2.K guarantees low energy consumption. The very thick lockable outer door opens through 90⁰, the door closes automatically.

The compressor is distinguished by its excellent performance, low noise level (<60dB) and minimal vibration. The RILSAN shelves promote the circulation of cold air inside the refrigerator. The electronic management system guarantees that the preset temperature is constantly maintained. The operating temperature can be set as required, as can the WARM and COLD alarm points. Two sensors located inside the unit constantly record the temperature, which is displayed on the control panel and transmitted to the electronic control system and graphic temperature recorder respectively. Any temperature deviations are therefore immediately detected.

The stainless steel interior provides optimal hygienic conditions and great sturdiness. Access to the mechanical equipment is easy and allows convenient cleaning.


Gross Storage Capacity: 408 litres

Material
Cabinet Insulation (mm)	85 bis 95
External Material	Powder painted steel
Internal Material	Stainless steel
Volumes
Gross Volume	408 l
Net Volume	319 l
Outside Dimensions
Height x Width x Depth (mm)	1735 x 850 x 785
Net Weight	179 kg
Inner Dimensions
Height x Width x Depth (mm)	1085 x 680 x 553
Ship Dimensions with Ocean (wood) packing
Height x Width x Depth (mm)	1915 x 900 x 970
Gross  Weight	242 kg
Temperature Set Range
Temp Set Point *(amb temp)	+40C bis +150C
Preset "Warm Alarm"	Set point +20C
Preset "Cold Alarm"	Set point -20C

* The amb. temperature must be always be 5K higher than the Set Point.